Libelium waspmote plug & sense Technical Manual Download

Page: 148 / 162

-148-

v5.8

Installation

26.3. Wall

Another typical installation of Waspmote Plug & Sense! is on the walls. Using the mounting feet accessory, the node can be

tied using provided screws and wall plugs. Next pictures show examples of typical installation processes using the external or

internal solar panel in combination with provided accessories.

26.3.1. External solar panel

Step 1: Secure the mounting feet to Waspmote Plug & Sense!

Use provided screws to secure firmly mounting feet to the node as shown in step 1 of the previous section.

Step 2: Secure the solar panel bracket to the external solar panel

Use provided screws to secure the solar panel bracket to the external solar panel. Be sure you place screws in the right bracket

holes, as shown in previous section.

Step 3: Secure Waspmote Plug & Sense! to the wall.

Use provided screws and wall plugs to secure firmly the node to the wall. Check if the node remains completely fixed to avoid

it could fall dow

Figure : Waspmote Plug & Sense! placed on a wall

Step 4: Secure the external solar panel to a wall

It is recommended to place the external solar panel above the node, using it as a roof. This will increase protection against rain

and sun. Use screws and the dedicated holes of the solar panel bracket to complete the installation.

Summary of Contents for waspmote plug & sense



































































































































































Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands

Libelium waspmote plug & sense, Technical Manual

Search results

Summary of Contents for waspmote plug & sense

Reviews:

Related manuals for waspmote plug & sense

Brands by name

Popular brands