manualshive.com logo in svg

Libelium Meshlium Xtreme, Technical Manual

Discover the Libelium Meshlium Xtreme, an innovative connectivity platform perfect for IoT projects. Get started quickly with the indispensable Quick Start Manual, providing comprehensive instructions and troubleshooting tips. Download this manual for free from our manualshive.com, enabling you to maximize the potential of your Meshlium Xtreme effortlessly and hassle-free.

Share
Download
background image

-40-

v7.3

Network interfaces setup

Meshlium

 

  

X

treme

If connection is established, the IP will be shown in the interface. Once the modem is connected a process will 

check the connection every 15 minutes and will try to reconnect in case of disconnection.

Figure: 4G successfully connected

Once validated your settings press the Disconnect button and save your configuration. If you want the 4G to be 

the Default Gateway of Meshlium each time it starts just activate the service in the “Set as Default Gateway” check 

box before saving. Setting this on will connect to the Internet using the 4G radio each time Meshlium restarts.

If any problem is preventing the device to connect at boot or to reconnect after a connection fall, a message will be 

displayed in the plugin. The user can manually stop automatic reconnection by pressing “Disconnect now” button.

Figure: 4G trying to reconnect

9.5. Proxy setup

This plugin allows to setup an HTTP proxy for some features of Meshlium. Here can be configured the proxy 

address, the port and the credentials (leave blank if not authentication needed).

Figure: Proxy setup plugin

Summary of Contents for Meshlium Xtreme























































































































































































































Reviews:

No comments

Related manuals for Meshlium Xtreme

IAI ERC3 User Manual preview
ERC3
Brand: IAI Pages: 5
Duemmegi Domino DFDALI Manual preview
Domino DFDALI
Brand: Duemmegi Pages: 11
3onedata GW110X Series User Manual preview
GW110X Series
Brand: 3onedata Pages: 44
Pathway connectivity solutions Pathport OCTO 64 Series User Manual preview
Pathport OCTO 64 Series
Brand: Pathway connectivity solutions Pages: 70
Seneca X-HDU Physical Connection Manual preview
X-HDU
Brand: Seneca Pages: 22
Elpro Technologies 105U-G User Manual preview
105U-G
Brand: Elpro Technologies Pages: 160
Honeywell RedLINK Installation Manual preview
RedLINK
Brand: Honeywell Pages: 60
Honeywell OW-CDX050 User Manual preview
OW-CDX050
Brand: Honeywell Pages: 134
Banner DX81H Network Manual preview
DX81H
Brand: Banner Pages: 110
Burkert ME43 Quick Start Manual preview
ME43
Brand: Burkert Pages: 13
Advantech UTX-3117 User Manual preview
UTX-3117
Brand: Advantech Pages: 78
Hitron CGNVM User Manual preview
CGNVM
Brand: Hitron Pages: 128
Broadxent BritePort 8120 User Manual preview
BritePort 8120
Brand: Broadxent Pages: 104
FP 50.0070.0001.00 Configuration Manual preview
50.0070.0001.00
Brand: FP Pages: 98
Advantech UNO-420 User Manual preview
UNO-420
Brand: Advantech Pages: 42
Black Box LRA1200A-E Instructions Manual preview
LRA1200A-E
Brand: Black Box Pages: 9
Asyril Asycube CC-Link Gateway User Manual preview
Asycube CC-Link Gateway
Brand: Asyril Pages: 21
Lucent Technologies AnyMedia 4300 Specifications preview
AnyMedia 4300
Brand: Lucent Technologies Pages: 2

Brands by name

Popular brands

Load more brands