-167-
v7.3
Device connectors
Meshlium
X
treme
13.1. Device Partners
13.1.1. Axis
Axis offers a wide variety of network videocameras and advanced analytic applications. More information: https://
www.axis.com/global/en/products/network-cameras.
Thanks to this plugin, the sensor data received on Meshlium can trigger actions on Axis cameras.
Figure: Axis plugin
13.1.1.1.
Configuration
Pior to configure Meshlium, make sure you set these parameters on the camera: IP, username, password and
presets.
For information about how to configure your camera, please check the installation guide of your camera model.
The Axis plugin is located in:
Manager System > Device Connector > Device Partner > Axis
In the “Configuration” panel, the user can set:
•
Log Level:
Generate log messages. From fewer to more details, the levels are: OFF, ERROR, INFO, DEBUG and
REPORT. The option by default is OFF.
•
Execution interval:
Time interval between checking camera’s rules.
In the “Add Camera” panel, the user can set:
•
Name:
Device rule name.
•
IP:
IP address of the camera.
•
User:
User name configured on the camera.
•
Password:
The password configured on the camera by the user (defined in the previous step).
•
PTZ Preset:
Preset of the camera to be used when the rule is executed. For obtaining a list of available presets
on the camera you have to fill the parameters above (IP, user and password). They will be used for getting the
presets when you press the button “Get Presets”. After pushing the button, the list of presets will be shown
and you will be able to select one of them.
•
Threshold:
Threshold in a sensor value for taking a picture. This field is not mandatory, but if you want to add
a threshold, you have to select one:
-
Waspmote sensor: Available sensor which will trigger the rule.
-
Operation: Available operations are: greater, less, greater or equal, less or equal, equal than or different
from.
-
Value: Value to be compared to the sensor selected.
