Libelium Meshlium Xtreme Technical Manual Download

Page: 160 / 214

-160-

v7.3

Cloud Connectors

Meshlium

treme

12.3.23. Simfony

Simfony’s IoT Platform is focused on providing the core set of tools that enables the rapid roll-out of any IoT

project or service. Companies can use the service to easily and rapidly design, prototype and deploy IoT projects

that match their exact needs and requirements, rather than looking for an off the shelf product that fits best. The

platform provides the following services: global mobile data connectivity, SIM management and control, device

authentication and authorization, a visual service designer, data storage, reporting and visualization, IoT VPN and

an extensive API exposing all of these capabilities for enterprise integration. All these services are available on a

“pick and choose” basis enabling maximum flexibility and optimizing costs.

More information can be found at

www.simfonymobile.com

12.3.23.1.

Configuration

The Simfony Cloud Connector is capable of self-configuration using data already provisioned from the Simfony

Cloud Platform. This function requires that the user is authenticated and authorized into the Cloud Service with a

specific set of credentials provided through the Self-Care portal. These credentials are not stored on the Meshlium

or by the Connector and will have to be entered manually each time an Auto-Configuration action is requested

through the web GUI. This functionality runs on the user’s browser that is connected to the Meshlium device and

requires Internet access, i.e. from the browser to the Cloud Platform API.

Once the user is authenticated, a list of all the Cloud provisioned devices is available for selection. If one of the

devices is selected in the drop-down list, the web GUI will automatically fill in or overwrite the following parameter:

Client ID, Device ID, Device Name, and Device Password.

Figure:

Simfony cloud connector configuration panel

If the Cloud Connector is already configured with a valid Device ID the Auto-Configuration feature will automatically

retrieve the Cloud provisioned data corresponding to that Device ID and fill in the parameters mentioned above.

Any previous configuration is overwritten. This functionality can be used to resync the data provisioned in the

Cloud with the configuration data of the Connector.

Figure:

Simfony cloud connector configuration synchronization panel

Summary of Contents for Meshlium Xtreme























































































































































































































Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Related manuals for Meshlium Xtreme

Brands by name

Popular brands

Libelium Meshlium Xtreme, Technical Manual

Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Related manuals for Meshlium Xtreme

Brands by name

Popular brands