Libelium Meshlium Xtreme Technical Manual Download Page 186

Page: 186 / 214

-186-

v7.3

Smartphone detection

Meshlium

treme

14.3.3. External database

Meshlium can synchronize all the WiFi devices information stored in the local database to an external MySQL

database managed by the user.

Figure: External database tab

In this tab the user can:

•

Setup the parameters of the external database and check the connection.

•

Enable or disable the synchronization.

•

Show last data inserted in the external database (up to 500 data).

•

Show the SQL script used to create the database and table needed for the synchronization.

•

Mark all data in the local database as synchronized so it will not be sent to the external database.

The steps to setup the synchronization are:

•

Before configuring anything, make sure you have a MySQL database working under your control. Make sure

the database listen to connections in an external IP.

•

Press the “Show SQL script” button, copy the SQL code. You can modify user, password, database name and

table, as long as you change the setup of the connection to match.

Summary of Contents for Meshlium Xtreme























































































































































































































Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Brands by name

Popular brands

Libelium Meshlium Xtreme, Technical Manual

Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Brands by name

Popular brands