Libelium Meshlium Xtreme Technical Manual Download

Page: 115 / 214

-115-

v7.3

Cloud Connectors

Meshlium

treme

12.3. Basic Cloud Partners

12.3.1. Amplía’s OpenGate

12.3.1.1.

Configuration

Inside the Amplía’s plugin you can find the different fields that you must configure for using your Meshlium

against OpenGate.

Figure:

Amplía Cloud Connector configuration panel

•

Server Host:

You must enter the host name that you are going to use for collecting the Meshlium events.

•

Server Port:

The port where the host is accessible.

•

API-Key:

Security key used for validating the access to the Host.

Click on the “

Save

” button for storing the configuration fields.

After that, press the “

Start

” button, and you will start to receive data from the configured Meshlium.

If you want to stop the event sending, just press the “

Stop

” button.

In the OpenGate OSS web portal you could check the different values collected by Meshlium and by the Waspmote

units which have sent messages using the configured Meshlium as gateway.

12.3.1.2. How to get your own API-key

For getting your own API-key you have to send an e-mail to [email protected] and Amplía Solutions will provide one

for you. In the same mail send the serial number of your device for creating it in the OpenGate platform.

Summary of Contents for Meshlium Xtreme























































































































































































































Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Related manuals for Meshlium Xtreme

Brands by name

Popular brands

Libelium Meshlium Xtreme, Technical Manual

Search results

Summary of Contents for Meshlium Xtreme

Reviews:

Related manuals for Meshlium Xtreme

Brands by name

Popular brands