25
ENGLISH
Control Panel Features
POWER (ON/OFF) BUTTON
•
Press to turn the washer ON. Press again to
turn the washer OFF. Pressing the POWER
button during a cycle will cancel that cycle and
any load settings will be lost. The drawer will
unlock after a brief pause.
NOTE:
•
If there is any water remaining in the tub after
the washer shuts off, it will drain following
4-minutes delay. The washer can be restarted
any time before the drain begins. However,
once the water begins to drain, all functions
will be suspended until the water has been
completely drained and the washer shuts off.
•
When the Power button is pressed, the
Normal cycle is selected by default. To modify
the default options or choose another cycle,
press the cycle selector (
) button to
illuminate the display.
CYCLE SELECTOR BUTTON
•
Press this button to select the desired cycle.
Once the desired cycle has been selected,
the standard presets will appear in the display.
These settings can be adjusted using the cycle
setting buttons any time
before starting the
cycle.
NOTE:
•
To protect your clothing, some settings will be
restricted depending on cycle selections.
START/PAUSE BUTTON
•
Press this button to start the selected cycle. If
the washer is running, use this button to pause
the cycle without losing the current settings.
NOTE:
•
If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the
washer automatically turns OFF and all cycle
settings are lost. Any water remaining in the tub
will be drained.
OPTION BUTTONS
•
Use these buttons to adjust the settings for the
selected cycle. The setting lights above the
buttons illuminate to show the current selection.
TIME AND STATUS DISPLAY
•
The display shows the cycle status and
estimated time remaining.
MFL69482502_EN.indd 25
16. 4. 5. 오전 9:16
