20
Using the Washer
Use Related
• LG Electronics' washer models support the capacity
set forth in. Depending on the type or volume of
laundry, the nominal capacity may differ from the
actual capacity.
• Do not exceed the laundry capacity. Greater than
nominal capacity may cause degraded product
performance and the product will be overloaded.
• The product performance or washing capacity is
determined by the electronic control program. Different
models may exhibit different washing capacity or
performance despite having the same drum and
motor.
Automatic Detection Function
• When selecting a specific cycle with automatic
detection function, after pressing the Start/Pause
button the machine will spin once or twice to detect
the amount of laundry. After the amount of laundry is
detected, water supply will begin.
• In some washing cycles, the sensor detects the
amount of laundry automatically and the washer
decides the optimized conditions for washing, such as
the most suitable cycle option for the laundry, washing
time, and amount of time for rinsing and spin-drying.
Things to Check Before Using the
Washer
• Is the water supply hose correctly connected to the
cold water side?
• Is the water faucet open?
• Is the power plug correctly inserted into the power
outlet?
• Is the water drain hose placed correctly?
• Is the product leveled?
Using the Washer Door
Opening the Washer Door
1
Hold and pull the drawer handle forward
completely.
2
Hold and lift the washer door handle upward to
open the washer door.
Closing the Washer Door
1
Push the washer door until it clicks.
2
Push the drawer completely closed.
CAUTION
•
Do not let your hands get stuck between the
washer door and the washer, as this can cause
injury.
•
If the washer door is damaged, it can cause injury.
In such a case, do not operate the washer, and
immediately call the LG Electronics service center.
•
Forcing the drawer or the washer door to open
can cause part damages and safety problems.
•
Closing the drawer before having closed the
washer door completely may scratch the washer
door glass.
•
Ensure the drawer is pulled out completely to
prevent the washer door from contacting the front
load washer. If the washer is used repeatedly
while the drawer is not pulled out completely, the
drawer may not be open smoothly.
MFL69482502_EN.indd 20
16. 4. 5. 오전 9:16
