LG-Ericsson GDC-400H, User Manual

Page: 48 / 64

GDC-400H Wireless Handset
User Guide
35
To set the internal or external ring options:
1. Select the Image and Sound menu from the User Menu.
2. Select the Sound.
3. Press the OK ( ) left soft button.
4. Use the Navigation ( ) button to highlight a selection.
 Internal Ring
 External Ring
5. Press the OK ( ) left soft button to access the sub-menu.
6. Press the Option ( ) left soft button to display the Internal and External Ring Options
7. Use the Navigation ( ) button to highlight a selection.
 Ring Type
 Volume
8. Press the OK ( ) left soft button to access the sub-menu.
For Ring Type:
1. Use the left and right arrows on the Navigation ( ) button to hear each ring tone.
2. Select the Set ( ) left soft button to select the tone.
3. Press the OK ( ) left soft button to confirm the selection.
4. Press the End ( ) button.
For Volume:
1. Use the left and right arrows on the Navigation ( ) button to adjust the volume.
2. Select the Set ( ) left soft button to select the tone.
3. Press the OK ( ) left soft button to confirm the selection.
4. Press the End ( ) button.
In the Ringing Mode sub-menu you select the alerting mode of the handset. The mode can be set to provide
audible ring, vibrate combinations of ring and vibrate or visual (ring LED flashes) only.
To set the Ringing Mode:
1. Select the Image and Sound menu from the User Menu.
2. Select Sound.
3. Press the Option ( ) left soft button to display the log Options
4. Use the Navigation ( ) button to highlight Ringing Mode.
5. Press the OK ( ) left soft button to access the sub-menu.
6. Use the left and right arrows on the Navigation ( ) button to select an option as below.
 By Ring audible ring and LED flashes
 No Sound LED flashes only
 By Vibrator handset vibrates and LED flashes, no audible ring
 Ring and Vib audible ring, vibrate and LED flash simultaneously
 Ring after Vib handset vibrates for 10 seconds then audible ring, LED flashes
7. Select the Set ( ) left soft button to select the tone.
8. Press the OK ( ) left soft button to confirm the selection.
9. Press the End ( ) button.
 Note:
You can quickly set the Silent (Vibrate) alert mode with the
*
/Silent Alert button ( ).