GDC-400H Wireless Handset
User Guide
17
Note:
If the handset is in the Charger/base, lifting the handset out of the charger automatically answers an
incoming call.
To reject the incoming call and stop the incoming call signal:
1. Press the End ( ) button, all signaling stops, but the caller hears ring-back tone.
3.7 Placing a Call on Hold
While you are on a call using the GDC-400H, you may place the caller in a waiting state where the caller
hears music on hold. This allows you to place another call or answer a call waiting.
To place a call on hold:
1. Press and hold, 1 second, the right arrow on the Navigation ( ) button. The call is placed on
hold and other party receives audio from the System music source. The User’s GDC-400H receives
dial tone form the system.
Note:
If a second call is waiting, the above procedure automatically connects the waiting call.
To place another call:
1. Press the End ( ) button; the wireless terminal returns to an idle state.
2. Place second call in the normal manner.
To retrieve the held call:
1. Press and hold, 1 second, the right arrow on the Navigation ( ) button; the held call is re-
connected.
3.8 Call Transfer
You can send an active call to another user of your LG-Nortel system. You can announce the transfer to the
receiving party (Screened Transfer) or without an announcement (Unscreened Transfer).
To Transfer an active call:
1. Press the right arrow Navigation ( ) button; the call is placed on hold and dial tone is received.
2. Dial the number of the internal user to receive the call.
3. To complete the transfer without announcement, press the End ( ) button,
OR
4. To announce the transfer, await answer, announce the transfer and press the End ( ) button.
3.9 Do Not Disturb (DND)
When the DND (Do Not Disturb) feature is active, the GDC-400H will not notify you of an incoming call. The
handset will not ring or vibrate allowing you to work without interruption from an incoming call. The host LG-
Nortel system determines routing of the incoming call while your phone is in DND.
To activate DND:
1. Press the Talk ( ) button.
2. Dial the DND code, default 553; a confirmation tone is received and the handset enters DND.
3. Press the End ( ) button. The wireless terminal returns to an idle state.
Summary of Contents for GDC-400H
