LG-Ericsson GDC-400H, User Manual

Page: 41 / 64

GDC-400H Wireless Handset
User Guide
28
5.12 Blocking Outgoing Calls w/Temporary COS
As an alternative to the handset Keypad Lock, you can block external calls from the handset employing the
host system by activating Temporary Class-of-Service. When Temporary COS is active, the handset can
make internal calls but cannot make external calls.
To activate Temporary COS and block outbound external calls:
1. Press the Talk ( ) button, you receive dial tone.
2. Press and hold, 1 second, the Speed/Program ( ) button.
3. Dial the Activate Temporary COS code, default 21.
4. Press and hold, 1 second, the Speed/Program ( ) button.
5. Press the End ( ) button.
To restore the normal COS and allow outbound external calls
1. Press the Talk ( ) button, you receive dial tone.
2. Press and hold, 1 second, the Speed/Program ( ) button.
3. Dial the Cancel Temporary COS code, default 22.
4. Dial/Enter your Authorization code (PIN).
5. Press and hold, 1 second, the Speed/Program ( ) button.
6. Press the End ( ) button.
 Note:
A user authorization code is required to restore COS.
5.13 Paging
The host system incorporates voice broadcasts to other stations and external speakers. During a page,
voice is broadcast to the speaker of idle stations assigned to receive the page. Each station is assigned to a
page group, known as a zone, and individual zones are paged. The Dial code and number of page zones
vary between systems(ask System Administrator for Page zone dial codes).
To Page over the host system:
1. Press the Talk ( ) button, you receive dial tone.
2. Dial the Page zone, see your System Administrator for Page Zones codes..
3. After the confirmation tone, speak in a normal voice; your voice is broadcast to the zone dialed.
4. When done, press the End ( ) button.
A paging party may request another user join in a conversation. The paged party can respond to the page
and the two parties are joined in a private conversation.
To respond to a request to join a conversation:
1. Press the Talk ( ) button, you receive dial tone.
2. Dial the Meet Me code, default is 544.
3. After the confirmation tone, a private connection is established to the paging party.
4. When done, press the End ( ) button.