GA 05.141/6.02 - 07/2003
Description
8
1.5 Standard specification
MAG
The turbomolecular pumps are shipped complete,
sealed in a PE bag containing a desiccant.
The maximum effective life time of the desiccant is one
year.
The intake flange is sealed with a transport seal, the
forevacuum flange with a plastic cap.
For the intake flange, a centering ring with FPM O-ring,
outer ring, and a splinter guard are enclosed.
We also provide the bolts for attaching the pump to your
tool. To avoid any safety risk we highly recommend using
only the bolts provided with the pump. Refer also to Sec-
tion 2.4 “Connecting the MAG ...”.
The electronic frequency converter MAG.DRIVE
digital
,
the cables required for operation and a seal kit to seal
the pump tightly if it is removed from the process must
be ordered seperately.
MAG.DRIVE
digital
•
Converter
•
Line supply cable with USA connector, approx. 3m
•
Line supply cable with EURO connector, approx. 3 m
•
2 spare fuses for the TMS (miniature fuses 5 x 20
mm, F4A; according to IEC 127-2/1) and 2 fuse hol-
ders 6.3 x 30 mm
•
Connector for control plug X14 (pins 47/48 bridged)
Front panel
Main switch
9-pin connecting socket for the plug-in control or for
connection of a serial interface
2 short-stroke keys
1 green/red STATUS LED
1 green COM LED (communications interface)
1 green MAIN LED (line supply voltage)
2 fuses TMS
The optional plug-in control has 10 keys and 1 LCD with
2 lines, each 16 characters. The plug-in control displays
operating statuses and failures and allows the configura-
tion of the pumping system.
Rear panel
X14 50-pin D socket connector for remote monitoring
and open-loop control
X19 3-pin Hirschmann connector for the connection to
the mains supply
X20 MIL standard socket connector for internal sensors,
magnetic bearing connection, motor drive, and
communication to the memory chip
X21 MIL standard socket connector for the TMS and
purge valve connection
Spare slot for optional network cards, e.g. Device
Net
