manualshive.com logo in svg

Lexmark XC4150, Service Manual

The Lexmark XC4150 is a superior multifunction printer designed for high-performance in various business environments. Take full advantage of this powerful machine by accessing the comprehensive and detailed Service Manual. Easily download this invaluable resource for free from our website, giving you complete control over your office productivity.

Share
Download
background image

Actions

Yes

No

Step 8

Replace the printer controller board. See 

“Controller board

removal” on page 409

.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Vertical lines (process direction using the ADF) check

Actions

Yes

No

Step 1

Isolate the scanner system by printing the advanced print quality
samples directly from the printer.

Enter the Diagnostics menu, and then navigate to:

Advanced Print Quality Samples

 > 

Advanced Print Quality

Samples

Is the scan defect seen on the print quality samples?

Go to step 2.

Go to step 3.

Step 2

Identify, and then resolve the print quality defect. See 

“Fixing print

quality issues” on page 36

.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check the small platen glass on the flatbed scanner for
contamination or damage.

Is the platen glass free of contamination and damage?

Go to step 5.

Go to step 4.

Step 4

Clean the glass or replace the ADF top cover.

Does the problem remain?

Go to step 5.

The problem is
solved.

Step 5

Check the small ADF glass for cracks or damage.

Is the ADF glass free of cracks or damage?

Go to step 7.

Go to step 6.

Step 6

Check the inside of the flatbed unit for dust or contamination.

Is the inside of the flatbed free of dust or contamination?

Go to step 7.

Contact the next
level of support.

7528

Diagnostic information

65

Summary of Contents for XC4150
































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XC4150

Sagem TX 20 Field Maintenance Manual preview
TX 20
Brand: Sagem Pages: 86
TE Connectivity T3212 Quick Start Manual preview
T3212
Brand: TE Connectivity Pages: 2
TE Connectivity T3200 Replacement Instructions preview
T3200
Brand: TE Connectivity Pages: 2
Xerox Phaser 7800 Installation Manual preview
Phaser 7800
Brand: Xerox Pages: 2
Xerox Phaser 3600 Voluntary Product Accessibility Template preview
Phaser 3600
Brand: Xerox Pages: 11
Xerox CiPress 325 Customer Help Information preview
CiPress 325
Brand: Xerox Pages: 192
Xerox Phaser 6100 Instructions Manual preview
Phaser 6100
Brand: Xerox Pages: 10
Xerox DocuPrint N24 Function Manual preview
DocuPrint N24
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7425 Quick Use Manual preview
WORKCENTRE 7425
Brand: Xerox Pages: 88
Xerox PHASER 8560MFP Supplementary Manual preview
PHASER 8560MFP
Brand: Xerox Pages: 10
Xerox ColorQube 9203 Quick Manual preview
ColorQube 9203
Brand: Xerox Pages: 33
Xerox C123 Copycentre Quick Reference Manual preview
C123 Copycentre
Brand: Xerox Pages: 154
Xerox WorkCentre 5845 Installation And Operation Manual preview
WorkCentre 5845
Brand: Xerox Pages: 14
Pantum M9106 Series User Manual preview
M9106 Series
Brand: Pantum Pages: 164
Konica Minolta bizhub 160 Parts Manual Manual preview
bizhub 160
Brand: Konica Minolta Pages: 35
Xerox LS 3270 User Manual preview
LS 3270
Brand: Xerox Pages: 55
Code Soft PL-330D User Manual preview
PL-330D
Brand: Code Soft Pages: 101
Lexmark CX310 series Brochure & Specs preview
CX310 series
Brand: Lexmark Pages: 2

Brands by name

Popular brands

Load more brands