Lexmark XC4140 User Manual Download Page 233

Page: 233 / 273

Place the Print Quick Test page on the ADF tray.

Touch

Front ADF Registration

Rear ADF Registration

Notes:

•

To align Front ADF Registration, place the test page faceup, short edge ﬁrst into the ADF.

•

To align Rear ADF Registration, place the test page facedown, short edge ﬁrst into the ADF.

In the Copy Quick Test menu, touch

Start

Compare the Copy Quick Test page with the original document.

Note:

If the margins of the test page are different from the original document, then adjust Horizontal

Adjust and Top Margin.

Repeat

step 5

and

step 6

until the margins of the Copy Quick Test page closely match the original document.

Contacting customer support

Before contacting customer support, make sure to have the following information:

•

Printer problem

•

Error message

•

Printer model type and serial number

Go to

http://support.lexmark.com

to receive e

‑

mail or chat support, or browse through the library of manuals,

support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries
or regions, go to

http://support.lexmark.com

Troubleshooting

233

Summary of Contents for XC4140


















































































































































































































































































Search results

Summary of Contents for XC4140

Reviews:

Related manuals for XC4140

Brands by name

Popular brands

Lexmark XC4140, User Manual

Search results

Summary of Contents for XC4140

Reviews:

Related manuals for XC4140

Brands by name

Popular brands