Lexmark XC4140 User Manual Download Page 143

Page: 143 / 273

Maintaining the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume

The speaker volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power

‑

on reset.

From the control panel, navigate to:

Settings

Device

Preferences

Audio Feedback

Select the volume.

Note:

If Quiet Mode is enabled, then audible alerts are turned off.

Adjusting the default headphone volume

From the control panel, navigate to:

Settings

Device

Accessibility

Adjust the headphone volume.

Note:

The volume resets to the default value after the session is logged out or when the printer wakes

from Sleep or Hibernate mode.

Conﬁguring the fax speaker settings

From the home screen, touch

Settings

Fax

Fax Setup

Speaker Settings

Do the following:

•

Set the Speaker Mode to

Always On

•

Set the Speaker Volume to

High

•

Activate the Ringer Volume.

Maintaining the printer

143

Summary of Contents for XC4140


















































































































































































































































































Search results

Summary of Contents for XC4140

Reviews:

Related manuals for XC4140

Brands by name

Popular brands

Lexmark XC4140, User Manual

Search results

Summary of Contents for XC4140

Reviews:

Related manuals for XC4140

Brands by name

Popular brands