Lexmark XC4100 Series User Manual Download

Page: 151 / 158

New York

Apple Computer, Inc.

Oxford

Arthur Baker

Palatino

Linotype-Hell AG and/or its subsidiaries

Stempel Garamond

Linotype-Hell AG and/or its subsidiaries

Taffy

Agfa Corporation

Times New Roman

The Monotype Corporation plc

Univers

Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO
9296.

Note:

Some modes may not apply to your product.

1-meter average sound pressure, dBA

Printing

53 (one-sided); 55 (two-sided)

Scanning

Copying

Ready

Values are subject to change. See

www.lexmark.com

for current values.

Static sensitivity notice

This symbol identiﬁes static-sensitive parts. Do not touch the areas near these symbols without ﬁrst touching
a metal surface in an area away from the symbol.

Temperature information

Operating temperature and relative humidity

10 to 32.2°C (50 to 90°F) and 15 to 80% RH
15.3 to 32.2°C (60 to 90°F) and 8 to 15% RH
Maximum wet bulb temperature: 22.8°C (73°F)

Shipping temperature

-10 to 40°C (14 to 104°F)

Notices

151

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands