Lexmark XC4100 Series User Manual Download

Page: 100 / 158

Hardware options problems

Cannot detect internal option

Action

Yes

Step 1

Turn off the printer, wait for about 10 seconds, and then turn it back
on.

Does the internal option operate correctly?

The problem is
solved.

Go to step 2.

Step 2

Print a menu settings page, and then check if the internal option
appears in the Installed Features list.

Is the internal option listed in the menu settings page?

Go to step 4.

Go to step 3.

Step 3

Check if the internal option is properly installed in the controller
board.

Turn off the printer, and then unplug the power cord from the
electrical outlet.

Make sure that the internal option is installed in the appropriate
connector in the controller board.

Connect the power cord to the electrical outlet, and then turn
on the printer.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre

or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet
that is near the product and easily accessible.

Does the internal option operate correctly?

The problem is
solved.

Go to step 4.

Step 4

Check if the internal option is available in the print driver.

Note:

If necessary, manually add the internal option in the

print driver to make it available for print jobs. For more
information, see

“Adding available options in the print driver”

on page 147

Resend the print job.

Does the internal option operate correctly?

The problem is
solved.

Contact

customer

support

Troubleshooting

100

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands