Lexmark XC4100 Series User Manual Download

Page: 104 / 158

Action

Yes

Step 2

From the home screen, touch

Settings

Paper

Tray

Conﬁguration

Paper Size/Type

Set the paper size and type to match the paper loaded in the
linked trays.

Print the document.

Do the trays link correctly?

The problem is
solved.

Contact

customer

support

Paper frequently jams

Action

Yes

Step 1

Pull out the tray.

Check if the paper is loaded correctly.

Notes:

•

Make sure that the paper guides are positioned correctly.

•

Make sure that the stack height is below the maximum
paper ﬁll indicator.

•

Make sure to print on recommended paper size and type.

Insert the tray.

Print the document.

Do paper jams still occur frequently?

Go to step 2.

The problem is
solved.

Step 2

From the Paper menu on the control panel, check if the printer
is detecting the correct paper size.

Resend the print job.

Do paper jams still occur frequently?

Go to step 3.

The problem is
solved.

Step 3

Load paper from a fresh package.

Print the document.

Do paper jams still occur frequently?

Contact

customer

support

The problem is
solved.

Troubleshooting

104

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands