Lexmark XC4100 Series User Manual Download

Page: 114 / 158

Action

Yes

Step 2

Load the speciﬁed tray or feeder with the recommended paper
type.

Resend the print job.

Do horizontal white lines still appear on prints?

Go to step 3.

The problem is
solved.

Step 3

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light can cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Do horizontal white lines still appear on prints?

Contact

customer

support

The problem is
solved.

Incorrect margins

A B C D

Action

Yes

Step 1

Squeeze and slide the paper guides to the correct position for
the size of the paper you are loading.

Resend the print job.

Are the margins correct?

The problem is
solved.

Go to step 2.

Step 2

From the Paper menu on the control panel, check if the printer
is detecting the correct paper size.

Resend the print job.

Are the margins correct?

The problem is
solved.

Go to step 3.

Troubleshooting

114

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands