Lexmark XC4100 Series User Manual Download | Manualshive

Page: 149 / 158

background image

Notices

Product information

Product name:

Lexmark XC4150, XC4140

Machine type:

7528

Model(s):

598, 196

Edition notice

January 2016

The following paragraph does not apply to any country where such provisions are inconsistent with local
law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is
not intended to state or imply that only that product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any existing intellectual property right may be
used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit

http://support.lexmark.com

.

For information on supplies and downloads, visit

www.lexmark.com

.

© 2016 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48
C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are
used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.
227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software
Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only
those rights as are granted to all other end users pursuant to the terms and conditions herein.

Notices

149

«
...
147
148
149
150
151
...
»

Summary of Contents for XC4100 Series































































































































































Reviews:

No comments

Related manuals for XC4100 Series

Brand: Samsung Pages: 9

Bixolon SRP-500

Brand: Samsung Pages: 27

550N - CLP Color Laser Printer

Brand: Samsung Pages: 288

2 COLOR THERMAL PRINTER SRP-275

Brand: Samsung Pages: 8

Brand: Samsung Pages: 6

Brand: Samsung Pages: 91

JG Titan MKII V2

Brand: iBox Pages: 5

Brand: QMS Pages: 2

Brand: Valentin Pages: 96

WorkCentre Pro 421

Brand: Xerox Pages: 4

WorkCentre Pro 412

Brand: Xerox Pages: 212

WORKCENTRE PE 220

Brand: Xerox Pages: 8

WORKCENTRE PE 220

Brand: Xerox Pages: 2

WORKCENTRE PE 220

Brand: Xerox Pages: 200

WorkCentre m940

Brand: Xerox Pages: 86

Brand: Xerox Pages: 24

WorkCentre PE16

Brand: Xerox Pages: 201

WorkCentre M24 Color

Brand: Xerox Pages: 441

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands