Lexmark XC4100 Series User Manual Download

Page: 117 / 158

Action

Yes

Step 7

Remove, and then reinstall the imaging kit.

Is the print still too light?

Contact

customer

support

The problem is
solved.

Print crooked or skewed

)

ABCDE

Action

Yes

Step 1

Remove the tray.

Remove the paper, and then load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Squeeze and slide the paper guides to the correct position for
the size of the paper you are loading.

Insert the tray.

Resend the print job.

Is the print still crooked or skewed?

Go to step 2.

The problem is
solved.

Step 2

Check if you are printing on a supported paper.

Resend the print job.

Is the print still crooked or skewed?

Contact

customer

support

The problem is
solved.

Repeating defects

)

Troubleshooting

117

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands