Lexmark XC2132, Service Manual

Page: 85 / 430

Message Action
Restore held jobs?
Try one or more of the following:
• Select Restore on the printer control panel to restore all
held jobs stored in the printer hard disk. For
non
‑
touch
‑
screen printer models, press OK to confirm.
• Select Do not restore if you do not want any print jobs to
be restored. For non
‑
touch
‑
screen printer models, press
OK to confirm.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support
person.
Scanner disabled. Contact system
administrator if problem
persists. [840.02]
Try one or more of the following:
• Touch Continue with scanner disabled to return to the
home screen, and then contact your system support
person.
• Touch Reboot and automatically enable scanner to
cancel the job.
Note: This attempts to enable the scanner.
Scanner jam, remove all originals from
the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner jam, remove jammed originals from
the scanner [2yy.xx]
Remove the jammed paper from the scanner.
SMTP server not set up. Contact system
administrator.
From the printer control panel, touch Continue to clear the
message.
Note: If the message appears again, then contact your
system support person
Some held jobs were not restored
From the printer control panel, select Continue to clear the
message. For non
‑
touch
‑
screen printer models, press OK to
confirm.
Note: Held jobs that are not restored remain in the printer
hard disk and are inaccessible.
Standard network software error [54]
Try one or more of the following:
• From the printer control panel, select Continue to
continue printing. For non
‑
touch
‑
screen printer models,
press OK to confirm.
• Turn off the printer and then turn it back on.
•
Update the network firmware in the printer or print
server. For more information, contact customer support.
7527
Diagnostic information
85