Lexmark XC2132, Service Manual

Page: 83 / 430

Message Action
Replace all originals if restarting job.
Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan
job.
•
Touch Scan from automatic feeder to continue scanning
from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the
scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last
successful scan job.
• Touch Restart job to restart the scan job with the same
settings from the previous scan job.
Replace [color] cartridge, 0 estimated
pages remain [88.xy]
Replace the indicated toner cartridge to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement cartridge, then see
the “Ordering supplies” section of the User’s Guide or visit
http://support.lexmark.com .
Replace [color] cartridge, printer
region mismatch [42.xy]
Install a toner cartridge that matches the region number of
the printer.
x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have
the following values:
•
0: Global
• 1: United States, Canada
•
2: European Union (EU), European Economic Area (EEA),
Switzerland
•
8: Rest of the world
• 9: Invalid
Notes:
•
The x and y values are the .xy of the error code shown
on the printer control panel.
•
The x and y values must match for printing to continue.
Replace [type] imaging kit, 0 estimated
pages remain [84.xy]
Replace the indicated imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User’s Guide or
visit http://support.lexmark.com .
Replace defective [color] cartridge
[31.xy]
Replace the defective toner cartridge to clear the message.
For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge,
then see the "Ordering supplies" section of the User’s Guide
or visit http://support.lexmark.com .
7527
Diagnostic information
83