Lexmark X950 Series User Manual Download Page 73

Page: 73 / 371

Squeeze and then slide the width guide to the correct position for the paper size loaded.

Squeeze and then slide the length guide to the correct position for the paper size loaded.

Note:

The length guide has a locking device. To unlock, slide the button on top of the length guide down. To

lock, slide the button up when a length has been selected.

Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.

Load the paper stack with the recommended print side faceup.

Loading paper and specialty media

Summary of Contents for X950 Series




















































































































































































































































































































































































Search results

Summary of Contents for X950 Series

Reviews:

Brands by name

Popular brands

Lexmark X950 Series, User Manual

Search results

Summary of Contents for X950 Series

Reviews:

Brands by name

Popular brands