Lexmark T620 Page 99 User Reference Manual Download

Page: 99 / 221

Characters have jagged or
uneven edges.

• Change the

Print Resolution

setting in the Quality Menu to 600 dpi or 1200

dpi.

• Turn

PQET

in the Quality Menu to On.

• If you are using downloaded fonts, verify that the fonts are supported by the

printer, the host computer, and the software application.

Part or all of the page is
printed in black.

• Check the print cartridge to see if it is installed correctly.
• If the charge roll has been replaced, verify that it is installed correctly.

The job prints, but the top and
side margins are incorrect.

• Make sure the

Paper Size

setting in the Paper Menu is correct.

• Make sure the margins are set correctly in your software application.

▲

Problem

Action

Summary of Contents for T620






























































































































































































































Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands

Lexmark T620, User Reference Manual

Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands