Lexmark T620 Page 71 User Reference Manual Download

Page: 71 / 221

Pull the paper up and toward you.

Note: The paper may be covered with unfused toner, which can stain garments and skin.

If the paper does not move immediately when you pull, stop pulling. You need to access the
paper from the rear door. See

Between the envelope feeder and the printer

for more

information.

Reinstall the print cartridge.

Close the upper and lower front doors.

202 Paper Jam
Open Rear Door

Jams that cause a

202 Paper Jam

message require opening the printer rear door.

Note: To resolve the message, you must clear all paper from the paper path.

For instructions on clearing the jam, click the area where the jam occurred:

•

Before reaching the standard output bin

•

While exiting to the standard output bin

Summary of Contents for T620






























































































































































































































Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands

Lexmark T620, User Reference Manual

Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands