Lexmark T620 User Reference Manual Download Page 142

Page: 142 / 221

142

Staple Job

Purpose:

To set stapling as the default for all print jobs. (Select stapling from the printer driver if you want to
staple only specific jobs.)

Values:

Note: Staple Job is displayed only when a finisher is installed.

Staple Prime Src

Purpose:

To specify the paper source you want the printer to use when the Prime Stapler is selected from the
Job Menu.

Values:

Note: Staple Prime Source is displayed only when a finisher is installed.

See also:

Prime Stapler

Off*

Does not staple print jobs.

Staples each multi-page print job sent to the printer.

Tray <x> (Tray 1*)

Selects paper from the specified tray.

MP Feeder

Selects paper from the multipurpose feeder.

Manual Pap

Selects a sheet of paper inserted in the manual feed slot.

Summary of Contents for T620






























































































































































































































Search results

Summary of Contents for T620

Reviews:

Lexmark T620, User Reference Manual, Page: 142 / 221

Search results

Summary of Contents for T620

Reviews: