manualshive.com logo in svg

Lexmark T620, User Reference Manual, Page: 117 / 221

Share
Download
Lexmark T620 User Reference Manual Download Page 117

117

What you can do: 

•

Send a job to print.

•

Press 

Go

 to quickly warm the printer to normal operating temperature and display the 

Ready

 

message.

Note: This message does not appear on the T620 printer.

See also:

Power Saver 

(Setup Menu)

Priming Failed.
Retry?

What this message means: 

The printer failed to prepare the stapler to staple print jobs.

What you can do: 

•

Press 

Go

 to try priming the stapler again.

•

Make sure staples are loaded and there is no jam in the stapler.

•

Make sure paper is loaded in the tray specified in the Staple Prime Source menu item.

•

Press 

Return

 or 

Stop

 to cancel priming.

Priming Stapler

What this message means: 

The printer is preparing the stapler to staple print jobs. The printer tests the stapler several 
times before returning to the Ready state. 

What you can do: 

Wait for the message to clear.

Print Jobs on
Disk. Go/Stop?

What this message means: 

Jobs that were spooled to the hard disk before the printer was last turned off have not yet 
printed.

What you can do: 

Summary of Contents for T620






























































































































































































































Reviews:

No comments