Lexmark T620 Page 78 User Reference Manual Download

Page: 78 / 221

–

If you do not see either end of the print material, see

Between three trays

to remove the

jam.

Slide the paper tray back into the support unit.

Between three trays

This type of jam may occur if you are using legal-size paper in the trays or if you have a 250-sheet
drawer installed with other optional drawers.

Pull the paper tray out of the support unit. If only a short piece of the paper is visible, do not
pull down to remove the paper.

Gently slide the paper tray back into the support unit.

Pull the paper tray out of the support unit that is above the tray you just closed.

Pull the paper either up or down. If it does not pull easily one way, try the other way.

Slide the paper tray back into the support unit.

Note: With this type of jam, there may be another jam under the print cartridge. Remove

the print cartridge and any jammed paper, and then reinstall the print cartridge.

Summary of Contents for T620






























































































































































































































Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands

Lexmark T620, User Reference Manual

Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands