Lexmark T620 Page 204 User Reference Manual Download

Page: 204 / 221

204

Pull the memory option out of the connector.

Place the memory option in its original packaging. If you did not save the packaging, wrap it in
paper and store it in a box.

If you need to install a replacement memory option or other option on the system board, refer
to the Setup Guide.

Refer to the Setup Guide for instructions on closing the printer system board.

Removing an option card

If necessary, refer to the Setup Guide for instructions on accessing the printer system board.

ARNING

Electronic components are easily damaged by static electricity. Touch something
metal on the printer before you touch the card.

Locate the option you want to remove.

Loosen and remove the two screws over and under the slot. Gently pull the card out of the
connector on the system board.

Place the option card in its original packaging. If you did not save the packaging, wrap the card
in paper and store it in a box.

If you need to install another option on the system board, refer to the Setup Guide.

Refer to the Setup Guide for instructions on closing the printer system board.

Summary of Contents for T620






























































































































































































































Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands

Lexmark T620, User Reference Manual

Search results

Summary of Contents for T620

Reviews:

Related manuals for T620

Brands by name

Popular brands