Lexmark Pro910 Series, Service Manual

Page: 43 / 118

Diagnostic aids
3-7
Lexmark Pro910 Series
Go Back
Previous
Next
Manufacturing Test
Manufacturing Test is intended for use during machine manufacturing.
To access the Manufacturing Test menu, from the home screen, touch > Manufacturing Test .
Available options
LCD Touch Panel Test See “LCD Touch Panel Test” on page 3-8 .
PH Contact Test See “PH Contact Test” on page 3-8 .
Clean Nozzles See “Clean Nozzles” on page 3-9 .
Tank Install Prime See “Tank Install Prime” on page 3-8 .
Pump Pressure Test See “Pump Pressure Test” on page 3-8 .
Clear NVRAM See “Clear NVRAM” on page 3-8 .
Single Test Page See “Single Test Page” on page 3-9 .
Manufacturing Mode See “Manufacturing Mode” on page 3-9 .
Show Strings See “Show Strings” on page 3-9 .
Carrier Life Test See “Carrier Life Test” on page 3-10 .
Maintenance Life Test See “Maintenance Life Test” on page 3-10 .
Pump Clutch Life Test See “Pump Clutch Life Test” on page 3-10 .
Calibrate Scanner See “Calibrate Scanner” on page 3-10 .
Scanner Life Test See “Scanner Life Test” on page 3-10 .
ADF Life Test See “ADF Life Test” on page 3-11 .
Copy Life Test Mono See “Copy Life Test Mono” on page 3-11 .
Copy Life Test Color See “Copy Life Test Color” on page 3-11 .
Head Install Prime See “Head Install Prime” on page 3-11 .
Tray 1 Paper Sensor Test See “Sensor Tests” on page 3-11 .
Tray 2 Paper Sensor Test
Tray 1 Paper Out Sensor Test
Tray 2 Paper Out Sensor Test
Tank Receiver Test See “Tank Receiver Test” on page 3-12 .
Align Printer See “Align Printer” on page 3-12 .