Lexmark Pro910 Series Service Manual Download Page 83

Page: 83 / 118

Repair information

4-33

Lexmark Pro910 Series

Go Back

Disassembly

Flowchart

This is the photo of the scanner unit.

ADF flatbed assembly and Scanner lid removal

Remove the following:

Right side cover. See

“Right side cover removal” on page 4-25

System board shield. See

“System board shield removal” on page 4-28

Scanner unit. See

“Scanner unit removal” on page 4-30

Unroute the cables through the bottom of the scanner unit.

Note:

Pay attention to the cable routing for reinstallation.

Disconnect the scanner hinges to separate the ADF flatbed assembly and the scanner lid.

•

Flex the right scanner hinges inward.

Note:

The spring easily gets lost.

Summary of Contents for Pro910 Series























































































































Search results

Summary of Contents for Pro910 Series

Reviews:

Related manuals for Pro910 Series

Brands by name

Popular brands

Lexmark Pro910 Series, Service Manual

Search results

Summary of Contents for Pro910 Series

Reviews:

Related manuals for Pro910 Series

Brands by name

Popular brands