Lexmark Pro910 Series, Service Manual

Page: 100 / 118

4-50
Service Manual
Lexmark Pro910 Series
Go Back
Previous
Next
Disassembly
Flowchart
Print engine removal
Remove the following:
a.
Paper tray. See “Paper tray removal” on page 4-7 .
b.
Power supply. See “Power supply removal” on page 4-4 .
c.
Duplex unit. See “Duplex unit removal” on page 4-5 .
d.
Paper stop. See “Paper stop removal” on page 4-8 .
e.
Wick. See “Jam clearance cover removal” on page 4-17 .
f.
Jam clearance cover. See “Jam clearance cover removal” on page 4-17 .
g.
Left side cover. See “Left side cover removal” on page 4-23 .
h.
Right side cover. See “Right side cover removal” on page 4-25 .
i.
System board shield. See “System board shield removal” on page 4-28 .
j.
Wireless card. See “Wireless card removal” on page 4-26 .
k.
System board. See “System board removal” on page 4-35 .
l.
Scanner unit. See “Scanner unit removal” on page 4-30 .
m.
Midframe cover and control panel. See “Midframe cover and control panel removal” on
page 4-38 .
n.
USB port/Memory card slot. See “USB port/Memory card slot removal” on page 4-41 .
o.
Front cover. See “Front cover removal” on page 4-44 .
The print engine remains.