Lexmark Optra N 4040, Reference Handbook

Page: 220 / 259

4049-XXX
8-23
4
049-
XXX
Page Count
To view or set the page count:
1. Enter Diagnostics mode.
2. Select [PAGE COUNTS].
3. Select [Page Count].
4. Choose any number between 0000000 and 9999999 by
Selecting [Next] to move the cursor under each digit. Select [+] or
[-] to select the number you want in each digit.
5. Select [SAVE] to save the page count displayed.
Paper Feed Tests
This test allows you to observe the drive gear train and feed paper
through the printer to check for broken gear teeth, watch the paper path,
or check the erase lamps.You may want to remove the gear cover
before starting this test so you can observe the motor gears.
Note: “Feeder” refers to the E or 100-Sheet Auxiliary feeder.
“Feeder 1” and “Feeder 2” refer to the front and rear bins of the Dual
Rear Feeder.
1. Enter Diagnostics mode.
2. Select [PAPER FEED TESTS].
3. Select [Tray 1], [Tray 2], [Tray 3],[Feeder],[Feeder 1], [Feeder 2],
or [Manual].
4. Select [Single] or [Continuous].
5. Select [CANCEL] to stop continuous.
6. Press Return to return to the Diagnostics mode main menu.
Parallel Confidence
This test requires specific PC software and is to be implemented with
the assistance of Lexmark Technical Support. It can be used to
diagnose parallel port interface problems.