Lexmark Optra N 4040, Reference Handbook

Page: 190 / 259

4047-05W
7-13
4
047-
05W
Hex Trace
Hex trace allows you to get a hexadecimal printout of the data stream
sent to the printer.
You can use either the service diskette or the internal WPS Diagnostic
Toolkit, if installed.
1. Select Setup from the menu.
2. Select Turn Hex Trace On from the Commands Description List.
3. Select Send to Printer.
4. Select OK.
Set Page Count
The page count can be viewed and changed. The page count can be
viewed on the customer test page or set as follows:
You can use either the service diskette or the internal WPS Diagnostic
Toolkit, if installed.
To set the Page Count:
1. Select Setup from the menu.
2. Select Set Page Count from the Commands Description List.
3. Select Send to Printer.
4. Select a value (0 to 99999) and enter the Printer Command
Update and Send screen.
5. Select OK.
Note: Page count should be changed when system board is replaced.