Lexmark Optra N 4040, Reference Handbook

Page: 137 / 259

6-10
Laser Printer Reference Handbook
4040
Diagnostic Information
The diagnostic information in this chapter is divided as follows:
• Base Machine Service Checks
• Print Quality Service Checks
• Paper Feed Service Checks
• Paper Deck Service Checks
• Paper Deck Paper Feed Service Checks
If you think your symptom is caused by a print quality failure go to the
“Print Quality Symptom Table” on page 6-11.
57 Check Tray 3 Be sure the following are correct:
• Tray 3, Paper drawer closed
• Power cord plugged in
• Option controller is installed
• Option controller signal cable is
completely installed.
• If you still have no power to the
paper deck, refer to the “Paper
Deck Power Input Service
Check” in the Service Manual.
58 Duplex not attached Be sure the duplexer is securely
latched into the printer.
POR to reset the printer.
59 Print Job on Disk No service required, refer to
operator manual.
63 Unformatted Disk Format the disk. Go to “Diagnostic
Aids” on page 6-16 and run the
device tests.
64 Defective Disk Replace the defective disk. Go to
“Diagnostic Aids” on page 6-16 to
format the new disk .
80 Scheduled Maintenance No service required, refer to
operator manual.
The Maintenance Kit must be
ordered and installed by the
customer. Part numbers can be
found in the User’s Guide.
This message appears each time
the printer is turned on.
Operator Codes (Continued)
Code Message or Symptom Action