4
Select
My printer is already set up. I am installing it on a new computer
.
5
Click
Continue
, and then follow the instructions on the computer screen for installing a configured printer on a new
computer.
Interpreting the colors of the Wi-Fi indicator light
The colors of the Wi-Fi indicator light show the network status of the printer.
•
Off
means one of the following:
–
The printer is turned off or is powering up.
–
The printer is not connected to a wireless network and is in Power Saver mode. In Power Saver mode, the power
light pulses on and off.
•
Solid orange
means one of the following:
–
The printer has not yet been configured for a wireless network.
–
The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hoc
device.
•
Blinking orange
means one of the following:
–
The printer is out of the range of the wireless access point (wireless router).
–
The printer is trying to communicate with the wireless access point, but the wireless access point is turned off
or not working properly.
–
Either the configured printer or the wireless access point has been turned off and back on, and the printer is
trying to establish communications with the network.
–
The wireless settings of the printer may no longer be valid.
•
Green
means that the printer is connected to a wireless network and is ready for use.
Special wireless installation instructions
The following instructions apply to customers outside of North America who are using a wireless broadband box. Some
examples of these boxes include LiveBox, AliceBox, N9UF Box, FreeBox, and Club Internet.
Before you begin
•
Make sure your box is wireless-enabled and activated to work on a wireless network. For more information about
configuring the box to work wirelessly, see the documentation that came with your box.
•
Make sure your box is turned on and that your computer is on and connected to your wireless network.
Adding the printer to your wireless network
1
Set up your printer for wireless networking using the setup instructions provided.
Stop when you are prompted to select a network.
2
If there is an association/registration button on the back of your box, press it before selecting a network.
Note:
After pressing the association/registration button, you have five minutes to complete the printer installation.
3
Return to the computer screen.
From the wireless networks list that appears, select your network, and then click
Continue
.
Networking
92
