Lexmark Interpret S400 User Manual Download

Page: 14 / 179

If your ink cartridge comes with a twist cap, then twist and remove the cap.

Install each ink cartridge. Use two hands to install the black cartridge.

Note:

Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.

Close the printer.

Ordering paper and other supplies

To order supplies or to locate a dealer near you, visit our Web site at

www.lexmark.com

Item

Part Number

USB cable

1021294

For more information, go to

www.lexmark.com

Paper

Paper size

Lexmark Photo Paper

•

Letter

•

4 x 6 in.

•

Notes:

•

Availability may vary by country or region.

•

For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark
PerfectFinish

Photo Paper.

•

For more information, go to

www.lexmark.com

Ordering and replacing supplies

Summary of Contents for Interpret S400




















































































































































































Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands

Lexmark Interpret S400, User Manual

Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands