Lexmark Interpret S400 User Manual Download

Page: 144 / 179

AKE

SURE

YOUR

COMPATIBLE

WITH

WIRELESS

PRINTING

THROUGH

ORT

The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or later.

The Continue button is unavailable

Try the following solutions in the order they appear until the Continue button becomes active and can be clicked:

HECK

THE

USB

CABLE

SECURELY

PLUGGED

INTO

THE

USB

PORTS

BOTH

THE

COMPUTER

AND

THE

PRINTER

USB ports are marked with the

symbol.

AKE

SURE

THAT

THE

PRINTER

PLUGGED

AND

TURNED

Check to see if the button is lit. If you have just turned on the printer, then you might need to disconnect the USB
cable and reconnect it.

AKE

SURE

THAT

THE

USB

PORT

THE

COMPUTER

WORKING

Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then the
port is working.

If the USB port on the computer is not working, then try using the other USB ports on the computer.

AKE

SURE

THAT

THE

USB

CABLE

WORKING

Try using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.

AKE

SURE

THAT

YOU

ARE

USING

THE

CORRECT

FOR

YOUR

PRINTER

MODEL

Compare the printer model on the CD to the printer model on the printer. The numbers should either match exactly
or be within the same series.

If you have any doubts, look for an updated version of the printer software on our Web site. For more information,
see “Installing the printer software” in the

User's Guide

. You can access the

User's Guide

from the link at the bottom

of the installation screen.

ECONNECT

THE

POWER

SUPPLY

Turn off the printer.

Unplug the power cord from the power outlet.

Remove the power supply from the back of the printer and then plug it back in.

Plug the power cord back into the power outlet.

Turn on the printer, and then resume the installation on your computer.

Troubleshooting

144

Summary of Contents for Interpret S400




















































































































































































Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands

Lexmark Interpret S400, User Manual

Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands