Lexmark Interpret S400 User Manual Download

Page: 11 / 179

Use the

LINE Port

LINE

Connect the printer to an active telephone line (through a standard wall jack, DSL filter, or
VoIP adapter) to send and receive faxes.

USB port

Connect the printer to a computer using a USB cable.

Warning—Potential Damage:

Do not touch the USB port except when plugging in or

removing a USB cable or installation cable.

Printhead access

Install the printhead.

Note:

The carrier moves to the printhead access area when no printhead is installed in the

printer.

Ink cartridge access

Install, replace, or remove ink cartridges.

Scanner unit

•

Access the ink cartridges and printhead.

•

Remove paper jams.

About your printer

Summary of Contents for Interpret S400




















































































































































































Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands

Lexmark Interpret S400, User Manual

Search results

Summary of Contents for Interpret S400

Reviews:

Related manuals for Interpret S400

Brands by name

Popular brands