28
Move your position to the left or right side of the
chair to hold the actuator in one hand and
set the coupling into the coupling base
underneath the seat.
Set the coupling bolt, which has to be
medium locked
into the base and the
coupling.
Ensure that the bolt is properly in
touch to the base and not tighten too much.
Assembly the base-plate of
the actuator support.
THE SCREWS HAS TO
BE MEDIUM LOCKED!!
The screws are only soft
tightened from inside of the
leg rest assembly. They will
be fully tightened later when
all screw of the support are
placed.
Plug in the Actuator and
drive it out till the
support fits to the leg
rest assembly.
The screws has to be
positioned. But only
tighten it when every
screw is placed.
Start with the front
counter sunk screw and
after the allen screws
from below.
If
the
support
is
positioned
properly,
tighten as first the base
plate and then counter
sunk screw and after
the allen screws.
