15
8.6.
Exchanging the rear caster
8.7.
Exchange the front wheel lowering cable
Remove the cover cap by pushing
upwards. Unscrew the nut until it
could be taken out.
Make sure you fasten the swiveling
fork with a screw locking device.
Bring the seat in a seating position and in tilt
backward position.
Dismount the shock absorber (A) from the
motor ball connection (B) as described in 8.2..
Unscrew the nut (C) at the cable end at the
rear.
Release the C-clips (D) which holds the cable
support. Take off the cable assembly (E).
Dismount the front cover (G) loosening the
screws (F).
Release the metal ear (M) which holds the head
of the front end cable (H) and take off the cable
head. Loosen the screw of the cable hose
tension adjustment (I) and bring it off the
holder (K) through the open gap (L).
The whole cable assembly can now be replaced.
Assure that you line up the cable hose the
same. Reassemble and adjust the cable, the
front cover and the shock absorber the
opposite way.
Once the cables are replaced, assure the front
wheel to the floor clearance is as described in
8.2.
The following pages would describe the cable
routing more detailed:
C
A
B
D
E
F
M
H
K
I
L
