![background image](http://html.mh-extra.com/html/levo-ag/c3/c3_service-manual_1886655005.webp)
5
3.3.
Adjustment of the knee support
The adjustment of the knee support can be done by the user or their family (see
user manual, chapter 9.9.).
3.4.
Electronic control system
The preset settings are chosen to ensure safe operation. The settings are in
compliance with all relevant legal requirements regarding the entire operating
range of the joystick and the speed control. In case the preset settings don’t
meet the needs of the user, the control system can be programmed individually;
the maximum speed might be decreased for example.
Warning: Programming should only be conducted by healthcare
professionals with in-depth knowledge of PG Drives electronic control
systems. Incorrect programming could result in an unsafe set-up of a
wheelchair for the user. LEVO AG accepts no liability for losses of any
kind if the drive or stability characteristics of the wheelchair are altered
without prior notification and discussion with LEVO AG.
It is in the responsibility of the person programming the control system to make
sure that the stopping distance requirement specified for the country in which
the wheelchair will be used is satisfied. If the braking rate is low, the forward and
reverse maximum speed settings may need to be re-programmed. It is in the
responsibility of the person programming the control system to make sure that
the settings are safe and to note any programming changes made.