6
3.5.
Standard programming PGDT VR2 and R-net
The programming is done by dubbing the control software of a laptop or PC to
the Controller of the wheelchair. Laptop / PC must be equipped with the
appropriate PGDT software.
• Start the software on your laptop / PC.
• Insert the read-in between the cable ends of the control panel cable and the
Controller; the interface is located below the armrest.
• Connect via the USB interface, the read-in on the laptop / PC.
• Transfer the program
The
C
3
drive programs are made to give the user more ease of use and even
better drive characteristics.
All
C
3
will be fitted with standard programs that provide the user with different
standard profiles programmed in the drive software.
The benefit for the user is that there is a more flexible way of speed and driving
settings in the chair, for both indoor and outdoor use.
Because multiple profiles per ordered speed setting are used, you do not need to
make the choice for the Standard, Classic and Fun at the order form anymore.
Motor setting improvements:
To optimize the current through the motors when they are pushed to their limits,
we have improved some parameters in the motor settings section of the drive
software.
Your benefits with these improvements are that the motors will be driven
towards their limits in a less intense way, which gives the motors a more durable
and longer life during extreme situations.
To perform a smoother start and stop of the C3 on slopes, we have optimized the
motor compensation value. Now the user of the chair will experience nearly no
rollback when coming to a full stop or when starting to drive on a slope.
Service Instructions:
The new programs can be downloaded from the secured Login section of the
LEVO website:
www.levo.ch