31
8.21.
Assembling of the tilt actuator unit
Set the wheelchair in the highest
position possible of tilt in space, so
that the gas springs are relieved.
Then unplug the actuator. Remove
the spring lock (A) on the top bolt
and remove the bolt.
Now you can equip the actuator and
replace it with a new one.
Put the new actuator in and mount
the lower bolt, and then plug in the
actuator and raise the chair as far up
as possible, until the top hole of the
actuator is superposed with the ear
so you can insert the upper bolt.
Mount the shaft locking clip (A).
A
B
