20
8.14.
Exchanging the batteries
8.15.
Exchanging the joystick module
8.16.
Exchanging the power module
Raise the wheelchair into the standing
position and remove the middle cover
in the back (see chapter 8.1.). Push
the pole cover back and unscrew the
screws on the battery poles.
Now you can lift out the batteries.
Put the new batteries in and fasten
the cable to the right battery poles.
If the batteries are not working,
please follow up the instructions at
chapter
8.21
.
Remove all cable cords from the
joystick cable all the way down to the
seat pan and unthread the cable.
Unscrew both screws (A) under the
joystick, now you can replace the
joystick module.
Fasten the module again with both
screws on the joystick-holder, thread
the joystick cable and plug it in and
fasten it with cable binder on to the
armrest, to the back and under the
seat.
Remove the back cover in the middle
first (see chapter 8.1.). Unscrew the
screws (A), and then you can tip the
power module back. Unplug all plugs
from the power module. Switch the
power module and plug in the plugs
again. Mount the new power module
on the wheelchair with the two
screws.
A
A
A
A
