8
5.
Tools & torque settings
The following tools are required to service the wheelchair:
Spanners and sockets: 8 mm through to 24 mm
Hexagon key: 2 mm through to 8 mm
Torque key: 1 Nm through to 50 Nm
Phillips head screwdriver and slotted screwdriver
Soft headed hammer
Torque settings:
Bolt size
Torque N
m
M4
3
M5
6
M6
10
M8
25
M10
50
6.
Important points
Do not reuse locknuts. Always replace with a new locknut.
Always use thread locking compound.
Always use recommended components and parts available from
LEVO AG.
Do not modify or repair the frame.
LEVO
is responsible for repairs on gas springs, motors and electronic parts.