User Guide Appendix A Installation
Rev. 1.30.03.07.r1
Page 223
Power On
WARNING!
Do not consume food or beverages while
operating the console, because lethal voltages (120V or 220V)
exist inside the console. Spills may cause a hazardous
condition, or may cause damage to the console.
CAUTION!
When the console has been stored in a cold
environment (below 40ºF), do not turn the power on until the
console warms up, or else damage to the console may occur.
You should avoid situations that could cause condensation to
occur inside the console.
Turning on the Monitor:
Once the console and monitor have come to
room temperature (about 25ºC or 75ºF), the console is ready to be turned
on. Refer to the instructions provided with the monitor and turn on its
power switch. If the monitor is plugged into a convenience outlet on the
rear of the console, you can leave the monitor power switch turned on. The
convenience outlet on the console is a "switched" outlet (it turns off when
the console is turned off).
Turning on the Console:
Turn on the console switch located on the right
rear corner of the back of the console. The “STATUS” LCD on the front
panel should illuminate. Within about ten seconds, the monitor should
warm up and show the Stage display. Refer to the instructions provided
with the monitor to adjust its display.
Summary of Contents for 24/48
