Chapter 5 Cues
Page 60 Rev. 1.30.03.07.r1
Recording a Cue with a Single Fade Time
Follow the example steps below to record a cue with a single fade time:
Procedure:
Notes
:
1. Press
[STAGE]
2. Press
[ENTER] [AT] [ENTER] [CLEAR]
to clear screen (if necessary)
3. Press
[50] [AND] [61]
Selects channels to be
recorded
4. Press
[FULL]
Not necessary to press the
[AT]
key when recording Full
5. Press
[RECORD CUE] [3]
6. Press
[TIME] [5]
Adds single up/down fade
time of 5 seconds
7. Press
[ENTER]
Records cue 3
Recording a Cue with Split Fade Times
The
[AND]
hard-key is used to assign separate up and down times. In the
command line, the up time and down times are shown separated by a "
+
".
Follow the steps below to record a cue in Stage with split fade times:
Procedure:
Notes
:
1. Press
[STAGE]
2. Press
[ENTER] [AT] [ENTER] [CLEAR]
to clear screen (if necessary)
3. Press
[50] [AND] [61]
Selects channels to be
recorded
4. Press
[FULL]
Not necessary to press the
[AT]
key when recording Full
5. Press
[RECORD CUE] [5]
6. Press
[TIME] [5] [AND] [7]
Adds split up/down fade times
of 5 and 7 seconds
7. Press
[ENTER]
Records cue 5
The up time specifies how long it takes for the next cue to fade in. The
down time specifies how long it takes for the previous cue to fade out.
Summary of Contents for 24/48
