Leviton 24/48, User Manual

Page: 202 / 256

Chapter 12 System Settings
Page 190 Rev. 1.30.03.07.r1
Setting number of Effect Steps
The console is capable of holding up to 600 recorded Effects. Each Effect
can have up to 100 steps. The total number of steps for all Effects
combined is 9,999. An Effect may be a simple sequential chase of channels
or a complex series of Submasters, Groups, Cues, or Device Traits.
Follow these example steps to set the number of effect steps to 1000:
Procedure: Notes :
1. Press [Setup] Opens the Setup Display
2. Press [10] [ENTER] Selects menu item 10:
"Number of efx steps”
3. Press [1000] Valid 10 to 9999
4. Select [1] from Memory re-order Press [CLEAR] to cancel
confirmation box
See
Chapter 7 Effects
for information on the programming and operation of
Effects.
Setting number of Groups
The console is capable of holding up to 500 Groups. A Group is a recorded
unit of channels or device traits similar to a cue but without timing
information. It can also be thought of as similar to a Submaster but without
a fader. Groups are very useful when programing moving lights.
Follow this example to set the number of Groups available to 120:
Procedure: Notes :
1. Press [SETUP] Opens the Setup display
2. Press [11] [ENTER] Selects menu item 11:
“Number of groups”
3. Press [120] Valid numbers 1 to 500
4. Select [1] from Memory re-order Press [CLEAR] to cancel
confirmation box
Remember, increasing the number of Channels, Groups, Macros,
Effects, Steps and Submasters will affect the remaining amount of
available console memory.